Posted in | News | Copper | Nickel | Cobalt

Geophysical Surveys Underway at North American Nickel’s Maniitsoq Project

VMS Ventures Inc. is pleased to announce that North American Nickel Inc., issued a press release this morning announcing Crone Geophysics of Mississauga, Ontario have mobilized their crews to the Imiak Hill Conduit Complex (IHCC) for NAN's southwest Greenland Maniitsoq project. VMS Ventures owns approximately 23.9% of NAN.

The release is as follows:

"North American Nickel Inc. is pleased to announce that Crone Geophysics of Mississauga, Ontario have mobilized their crews to the Imiak Hill Conduit Complex (IHCC), part of the Company's 100% owned Maniitsoq nickel-copper-cobalt-PGM project in southwest Greenland.

Geophysical Surveys Underway

The geophysical survey work now underway consists of surface time-domain PEM and gravity surveys in the Imiak Hill Conduit Complex, where significant nickel-copper-cobalt PGE mineralization has been intersected in drill holes by the company over the past two drill seasons. These intersections include:

  • Imiak Hill DDH MQ-13-028: 24.75 metres of near massive to massive sulphide grading 3.19% Ni, 1.14% Cu, 0.11% Co, including; 17.91m of 3.80% nickel, 1.42% copper, 0.13% cobalt and 0.01 g/t PGM;
  • Imiak North DDH MQ-13-029: 55.75m of disseminated to near massive and massive sulphide grading: 1.28% nickel, 0.36% copper, 0.04% cobalt, and 0.03 g/t PGM, including;9.99m of 4.65% nickel, 0.33% copper, 0.13% cobalt and 0.08 g/t PGM; and
  • Spotty Hill DDH MQ-12-005: 123.94 meters of disseminated, net-texture, to near massive and massive sulphide grading 0.81% nickel, 0.21% copper, 0.03% cobalt & 0.26 g/t platinum (Pt) + palladium (Pd) + gold (Au), including: 24.20 m @ 1.75% Ni, 0.34% Cu, 0.06% Co & 0.52 g/t Pt+Pd+Au.

Geological Team Meeting April 8-10, 2014 in Winnipeg

As preparation for the 2014 field and drill program all norite-hosted nickel sulphide mineralized drill targets were reviewed by the NAN Geological team and four invited geoscientists familiar with nickel sulphide deposits and advanced methods of interpretation of geophysical responses to nickel sulphide mineralization. The review was undertaken at a meeting convened in Winnipeg by North American Nickel with a view to expanding discovery possibilities and then confirming and prioritizing drill targets for this year's drill program.

President Dr. Mark Fedikow P.Geo. states: "Our deepest hole to date at Imiak Hill in the IHCC intersected high-grade massive sulphide nickel-copper mineralization 185 m below surface. The new geophysical ground surveys are designed to look below that depth and define the extent and shape of our high-grade mineralized zones providing plunge, strike and dip attitudes for the mineralization. The results from these 2014 ground geophysical surveys coupled with the airborne surveys and drill results from 2012 and 2013 will assist with drill targeting at the IHCC. Our team worked last week with four seasoned and internationally experienced nickel sulphide geoscientists. The agenda included a thorough review of the IHCC and all the regional norite-hosted nickel sulphide targets identified as a priority for the 2014 season. We look forward to including them again along the path to discovery at Maniitsoq."

The PEM Survey

The PEM system operates by placing a large loop of insulated wire on the ground through which a precisely-controlled changing current induces magnetic responses from conductors hundreds of metres deep in the ground. It can be used to detect and discriminate between a wide range of conductivities from poor (zinc), to excellent (copper and nickel). Due to its unique transmitted current waveform and its receiver's measuring system, Crone has developed a step-response transformation of the data which extends this range of detection and discrimination into the extremely high conductance that is seen in nickel exploration. This feature has made the Crone PEM system an important part of the exploration efforts in nickel exploration camps around the world, such as the Raglan camp, Voisey's Bay, Sudbury, Alaska, Tanzania, Western Australia, and now Greenland.

The Gravity Survey

In addition to the Pulse EM survey, Crone will carry out a gravity survey with a 2 person crew consisting of a gravity operator and a GPS operator with extensive experience in precision gravity surveys. The equipment consists of LaCoste & Romberg model G gravity meters with a reading resolution of 0.01 mGal. The differential GPS (DGPS) system is the Leica - model 1230 Dual Frequency, Dual Constellation (GPS & GLONASS) RTK, rover and Base Station with an accuracy of 1 cm + 1 ppm in separation from the base station to the rover. The crew has extensive worldwide experience and is capable of reducing the data to bouguer mGal values nightly in the field. Gravity surveys measure extremely small variations in the Earth's gravitational field, which can be used to locate high density material such as nickel sulphide-bearing rock.

Source: http://www.vmsventures.com

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Your comment type
Submit

While we only use edited and approved content for Azthena answers, it may on occasions provide incorrect responses. Please confirm any data provided with the related suppliers or authors. We do not provide medical advice, if you search for medical information you must always consult a medical professional before acting on any information provided.

Your questions, but not your email details will be shared with OpenAI and retained for 30 days in accordance with their privacy principles.

Please do not ask questions that use sensitive or confidential information.

Read the full Terms & Conditions.