Hanking Gold International Limited is pleased to announce the results of a reverse circulation (the “RC”) drilling program completed over the historical waste dump at the Rustlers Roost gold deposit, part of the Company’s 100% owned Mt Bundy Gold Project in the Northern Territory of Australia. The program comprised 41 RC holes for a total of 960 meters and covered the entire footprint of the waste dump. The drilling confirmed that gold mineralization is present throughout the waste dump
Between June 1994 and March 1998, Rustlers Roost was mined as a shallow open pit, who treated the oxide ore through a heap leach operation. Based on the gold prices and heap leach recoveries applicable in the 1990s, the operating cut-off grade at Rustlers Roost was approximately 0.8 g/t Au, and any material grading below that threshold was classified as waste and placed on the waste dump. Based on the Company’s site survey and preliminary calculations, the waste dump is estimated to contain approximately 10 million ton of oxidized material.
The 2026 waste dump drilling program adopted the reverse circulation (RC) method. A total of 41 vertical RC holes (STPRC070 to STPRC110) for 960 meters and 24 meters average hole depth were drilled on a regular 50-meter grid designed to cover the whole of the waste dump footprint,with each hole drilled through the full thickness of the waste dump and into the underlying natural surface.The material consists of oxidized waste rock and low-grade material that has already been mined and broken. The DFS metallurgical recovery for oxide and transitional ore is approximately 90%, and the DFS Rustlers Roost Ore Reserve cut-off grade is 0.22 g/t Au.
Gold mineralization was intersected from surface in the majority of holes and continued through the full thickness of the waste dump, with individual intercepts of up to 35 meters. Specific intercepts included: STPRC070, 12 m at 0.69 g/t Au from 0 m; STPRC071, 7 m at 0.65 g/t Au from 0 m; STPRC073, 8 m at 0.82 g/t Au from 7 m; STPRC075, 9 m at 0.47 g/t Au from 3 m; STPRC076, 10 m at 0.51 g/t Au from 3 m; STPRC078, 7 m at 0.57 g/t Au from 24 m; STPRC083, 18 m at 0.41 g/t Au from 0 m; STPRC085, 16 m at 0.69 g/t Au from 0 m; STPRC086, 17 m at 0.56 g/t Au from 0 m; STPRC087, 15 m at 0.56 g/t Au from 0 m; STPRC093, 18 m at 0.48 g/t Au from 0 m; STPRC098, 8 m at 0.47 g/t Au from 0 m; STPRC100, 27 m at 0.43 g/t Au from 1 m; STPRC109, 19 m at 0.41 g/t Au from 10 m; and STPRC110, 35 m at 0.47 g/t Au from 0 m. As the holes are vertical and the waste dump material is unconsolidated, down-hole length approximates true thickness. Because the waste dump was built entirely from material mined out of the shallow oxide pit, all of the dump material is oxidized. Leach test work completed for the proposed Rustlers Roost processing plant in the DFS returned an average overall gold recovery of 91.2% for Rustlers Roost oxide and transitional composites, with low reagent consumption
The Company has designed a follow-up RC drilling program of approximately 10,000 meters over the waste dump. The program is designed at a drill spacing sufficient to support the estimation of a maiden Mineral Resource and Ore Reserve estimates for the waste dump area in accordance with the JORC Code. The program is scheduled to commence in mid-September 2026. Further announcements will be made as results become available.
Commenting on the latest drilling results, Dr. Qiu Yumin, an executive director, the chief executive officer and president of the Company, said that: “What was waste in 1997 is ore today. The previous operators were constrained by a heap leach method recovering only 70% of the gold and by a much lower gold price. With a modern CIL plant designed to recover more than 90% gold for the oxidized ore and a cut-off grade of 0.22 grams per ton estimated at AUD3,750 per ounce in our DFS, that same material now looks very different to us. Results from the initial drilling program with a grid of 50 x 50 m over the 10 million tons material are very encouraging. Once converted into JORC Code gold resource and ore reserve through our upcoming 10,000 meter’s drilling program, this low-cost and ready-for-processing material can then be scheduled into our production and provides material flexibility for the ramp up and operation of the 5.5 Mtpa processing plant which is under construction. This material is expected to create substantial extra value for the Company’s shareholders and local economy.”